Editing Vertical Alignment Data - Horizon Fitness HTS-580 Series Operation Manual

7.6.6 Editing vertical alignment data

The following procedures are used to edit the data.
Operation procedure
Press F4 (edit
alignment data) in the menu of
road design, the last entered
point will be shown.
Press [▲] or [▼] to select the
alignment data to be modified.
Press F1 (edit) to edit, and
press ENT (ENTER). *1
The modified alignment data
will be displayed. Continue to
select data to modify by using
the [▲] or [▼] keys. ESC to
end.
*1Or press F4 (search), then input the stake number of the alignment data
(chainage) which is required to be modified.
Operation
vertical
F4
[▲]or[▼]
F1
Enter data
ENT
Display
101