Press F1 (ANG.OFFSET) key
Collimate prism P, and press the
F1
(MEAS) key.
The horizontal distance from the
instrument to the prism will be
measured.
Collimate point AO using the
horizontal
motion clamp and
horizontal tangent screw.
Show the north coordinate, east
coordinate and z coordinate of
waited measuring point by
pressing
key.
To return to procedure 3, press F4 (NEXT) key
To return to the previous mode, press ESC key
F1
Collimate
[P]
F1
Collimate
AO
47