Data Logging - Horizon Fitness HD-S2 User Manual

Data Logging

Before using the logging function acquire the satellite that you have chosen, ensuring that the received levels are as
good as they can be. Then access the Sub-menu by pressing the UP button once; navigate down and highlight the
"Log as 00000" line. By pressing the right arrow at this point the levels from your satellite selection will be stored in
to the memory and numbered; this number will increment each time your store your measurements. Note this
number down as you will need to refer to it later when downloading the log information from your meter later.
The logging software required to extract the stored values is available from the www.horizonhge.com web site.
Note: Before you start to use the logging program please ensure that the USB drivers have already been
downloaded as described on pages 18 and 19.
To start the Log Reader program double
click the HD-S2 Log Reader program icon
(this will look like a target) a small program
will appear as illustrated.
Connect your HD-S2 via the USB lead supplied
to you PC. Wait for the HD-S2 to settle in
Program mode and then click Read.
Once you click OK you will be presented with a table of your logged measurements. From here you
can export this data in CSV (Comma Separated Values) format for use with other office programs.
Remember: When you erase the meter log data the log counter
on the meter will not be reset but the stored values will be cleared.
Tip: If you wish to erase the current log data within the
HD-S2 select the File drop-down menu and click on Erase Log.
Once the file has been read a pop up
will appear "Log download complete"
Page 14