Setting Of The Vertical Angle Display; Setting Of The Plotting Points Number - Horizon Fitness HTS-580 Series Operation Manual

11.2.5 Setting the vertical angle display
The vertical angle display can be measured from Zenith or the horizontal plane. The
Z0 (zenith) method is the most often used for surveying purposes, the "0" value will
be directly overhead.
Operation procedure
Press F1 key from MEAS
PARA. menu 2/2 for the V
ANGLE Z0/H0 screen
Press the F2 (H0) key then
press the ENT key to return to
MEAS PARA menu.
11.2.6 Setting Of Plotting Points Number
Setting of the maxmum points number displayed on the screen.
Operation procedure
Press F2 in the menu measured
parameter (2/2) setting interface
to enter setting of plotting points
number interface.
Operation
F1
F2
Operation
F2
Display
Display
221