Operation Procedure - Horizon Fitness HTS-580 Series Operation Manual

Measured data:
The collected data is organized into files and you can save measured original
data and coordinate data together.
1）When turning the instrument off always have the instrument display on the main
menu or angle measurement screen. This ensures completion of the memory access
process and avoids possible damage to the stored data.
2）It is recommended to use fully charged batteries to facilitate data collection
whenever possible.

8.1 Operation procedure

1. Select a Data Collection File to save data to.
* You should first go to menu 2/2 of the GATHER DATA menu, select F2 (CONFIG)
and select "YES" or "NO" in "AUTO SAVE COORD."
2. Select a Coordinate Data file .
3. Set occupied Point including Instrument Height, Point Number and Coordinate.
4. Set Backsight Point, Direction and Azimuth.
5. Set PT#, PCODE and R.HT ,start collecting and saving data.
134