Area Calculation - Horizon Fitness HTS-580 Series Operation Manual

7.3 Area Calculation

This mode calculates the area of an enclosed figure.
There are two area calculation methods as follows:
1) Area calculation from Coordinate data file
2) Area calculation from measured data
Note：
Area is not calculated correctly if observed lines cross each other.
It is not possible to calculate area from a mix of coordinate file data and measured
data.
The number of points used for calculation is not limited.
The area to be calculated shall not exceed 200000 sqm. (approx. 49 acres)
1) Area calculation from Coordinate data file
Operation procedure
①Press M menu key
②Press the F2 key, enter the
Measurement Program.
72
Operation
M
F2
Display