Data Conversion Using Usb; Data Export - Horizon Fitness HTS-580 Series Operation Manual

10.8.2 Data Conversion by USB
Start up the instrument, connect the instrument to PC with USB cable, the menu
is displayed on the screen as below.
This reprensents the connection is normal, then you can operate the data file
stored in the instrument by data transmission software, It is also possible to copy the
file on PC into the instrument.

10.8.2.1 Data Export

Data type in the memory of total station
1. *. RAW—Measurement file
2. *. PTS—Coordinate file
3. *. HAL—Horizontal line location file
4. *. VCL—Verical line location file
5. *. PCOPE. LIB—Pcode file
In order to export the relevant data fromcertain file, you can just open the
corresponding file by data transmissing software.
For example: Open TS. RAW file
Start transmission software, select"open EMS file" in the meau" USB
206
USB Working......
Please disconnection
Press <ESC> to exit!