Horizon Fitness HTS-580 Series Operation Manual page 94

Operation procedure
Press F2 (Edit
alignment) on the road design
menu to enter into the horizontal
alignment editing interface.
Through pressing [ ▲ ] or [▼],
select the alignment data which is
required to be modified, and press
F1 (edit) to edit it, and finally
press ENT (ENTER) to confirm.
*1）
Return to the alignment interface,
the modified alignment data will be
displayed, and then continue to
modify the other alignment data as
needed
*1 Or press F4 (search), then input the stake number of the alignment data
(chainage) which is required to be modified.
94
Operation
horizontal
F2
[▲]or[▼]
F1
Enter data
ENT
Display