Plane Offset Measurement - Horizon Fitness HTS-580 Series Operation Manual

⑥Collimate the Prism P and
press F1, display HR, HD, VD
and SD of aim point and add
offset correction.
⑦ Press the
A0 coordinates values, N, E
and Z.
⑧Press F4 (NOTE) key. The
data is recorded and the next
Measuring point is displayed.

8.3.3 Plane Offset Measurement

By measuring three known points on a plane other points on that plane can be
calculated and determined.
Three random prism points (P1, P2, P3) on a plane need to be measured first.
To determine and unknown point collimate the measuring target point (P0), the
instrument calculates and displays coordinate and distance value of the cross point
between the collimation axis and the plane.
152
Enter HD
to display
F1
F4
F4