Layout - Horizon Fitness HTS-580 Series Operation Manual

Operation procedure
Press F2(SLOP)key from
LAYOUT menu
Input CUT L FILL L CUT R,
LFIL, RDIG, or FillR and
press the ENT key.*1,*2
Turn the instrument
measure. When
displayed in [→] and [↑] is
0, the setting out point is
correct.
To return to the previous
mode press the ESC key
Note：*1） An intersection can not be computed if the ground surface passes
through the hinge point.
*2）The cut is not displayed because the cut at the computed point is zero.
Operation
Enter data
ENT
and
the data
ESC
F2
F1
Display
113