Table of Contents
Advertisement
Data Recording and Playback
The built in recording feature is like recording
a TV show for later playback except that you're
using data coming from the Renewable Energy
Monitor instead. The Recording and Playback
controls are shown here.
The top three controls are...
Record
Play – Pause
Recording Data
Click the (round) Record icon to start recording
data. The icon will change to a brighter red
color.
Stop Recording
Click the (square) Stop icon when you're done
recording.
The Stop icon will momentarily
change color from white to green – then back to
white again. The red Recording icon will also
turn off and the plot will go back to real time.
7
Play and Pause
C l i c k t h e ( t r i a n g l e ) P l a y i c o n t o b e g i n
replaying the recorded data. The Play
icon will change from white to green during
playback.
You can Pause the playback by clicking again
on the (triangle) Play icon. It will change from
a green triangle to a green double line. Click
the Pause icon again to resume playback.
Recording Counter
The Recording Counter indicates the number
Stop
of data samples that are (or have been)
recorded for later playback. It can range from
1 to 999.
The Trash Icon
Click the Trash icon to erase all the recorded
data. This will also reset the time on the plot
area back to 0.0 minutes. You can push the
Trash icon anytime; just make sure you really
want to erase all the recorded data.
Advertisement
Table of Contents
