Horizon Fitness HTS-580 Series Operation Manual page 120

Operation procedure
① after inputting the end
poi-nt NO. and the known
point NO.， "input the closure
point NO.(The
measuring point)
known point NO. " will be
displayed, the
No. of the two points must not
be the same.
② after inputting the closure
point NO. and the known point
NO., press ENT key ， the
instrument will calculate the
closure difference, as displayed
in left picture, then press F3
key to enter or press
escape.
③ the adjustment result is
displayed.If the angle is in the
allowed range,press F3 key to
receive the data.
④Now ，instrument dispalys
" ADJUSTMENT ANG ？ "
pressF4 key to carry out angle
adjustment, if you select to
press F3or ESCkey, the data
will not be changed.
120
operation
actual
and the ENT
F4 to
F4
or
F3
F4
or
F3
F4
or
F3
display