Setting The Parameters For Data Collection; Preparation; Setting The Grid Factor; Selecting The Coordinate Data File - Horizon Fitness HTS-580 Series Operation Manual

9.1 Setting the Parameters of Data Collection
To use the layout procedure mode use the following steps:
1. Select the data file to record the data collected.
2. Set the occupied point.
3. Set the backsight point or azimuth angle.
4. Input layout point coordinates and follow menu prompts.

9.2 Preparation

9.2.1 Setting the GRID FACTOR

The Grid Factor can be set in the Parameter Set menu of the CONFIG options.
9.2.2 Selecting Coordinate Data File
You can execute a Layout from a selected coordinate data file or you can record
new measured data into a selected coordinate data file.
162