Horizon Fitness HTS-580 Series Operation Manual page 77

④Enter the File Name then
press ENT to affirm.
Press the F2 (REF. MEAS)
key and enter the point
number (press F2 for LIST)
After input the PT#, press
the ENT key, the coordinate
of this point is shown.
⑦Press the F4 (YES) key to
confirm instrument height
setting display will be shown.
Enter the instrument height,
press ENT key. Press F1
(MEAS) for observation
results
For more information about data file, see chapter 10 "Memory Management
Mode".
Input
File Name
ENT
F2
ENT
F4
Enter
INS.HT
ENT
77