Distance Measurement; Setting The Atmospheric Correction; Setting The Prism Constant; Distance Measurement (Continuous Measurement) - Horizon Fitness HTS-580 Series Operation Manual

5. DISTANCE MEASUREMENT

When setting the atmospheric correction obtain the correction value by
measuring the temperature and pressure.
5.1 Setting of the Atmospheric Correction
When setting the atmospheric correction obtain the correction value by
measuring the temperature and pressure. Refer to Section 3.2 "Setting of the
Atmospheric Correction".
5.2 Setting of the Correction for Prism Constant
The instrument is preset for a Prism Constant value of -30mm at the factory. If
the prism is of another constant the instrument needs to be updated with this
constant. Refer to Chapter 3.3 "Setting of the Prism Constant". The updated value
is kept in the instrument memory after the power is shut off.

5.3 Distance Measurement (Continuous Measurement)

Make sure the angle measurement mode is selected.
Operation procedure
Collimate the center of prism
*1
40
Operation
Collimate
Display