Horizon Fitness HTS-580 Series Operation Manual page 73

③Press F3 (AREA) key
Press F1 (FILE DATA) key
Enter file name or press F2 for
LIST. Press ENT key, Initial
display will be shown .
⑥Press F4 (NEXT) key
The top of the file data
(DATA-01) will be set and the
second point number will be
shown.
Repeat pressing F4 (NEXT)
key to set required number of
the points. When 3 points are
set, the area surrounded by the
points is calculated and the
result will be shown.
* To set the required point number, press F1 (PT#) key.
* To show the list of the coordinate data in the file, press F2 (LIST) key.
F3
F1
Enter
File name
ENT
F4
F4
73