Layout - Horizon Fitness HTS-580 Series Operation Manual

9. LAYOUT

The two functions of LAYOUT mode are staking out known points and
surveying unknown points either using a sideshot or resection method. Surveying
points can be retrieved from internal memory or coordinates manually entered into
the instrument.. The coordinate data is loaded from a computer to the internal
memory via RS-232C, USB, or SD card.
The coordinate data is stored in a COORD. DATA file.
For the internal memory refer to Chapter 10 "MEMORY MANAGEMENT
MODE"
1 ) When turning off the power always have the instrument display on the
main menu screen or main angle measurement mode screen. Failure to have the
instrument in these screens could corrupt the stored data if the instrument is
powered off.
2 ) It is recommended for safety to fully charge the batteries before operation.
Always have a fully charged battery on hand for convenience.
3 ) When recording new data always consider the amount of internal memory
available. The SD card port will provide nearly unlimited available storage.
161