Importing Vertical Alignment Data - Horizon Fitness HTS-580 Series Operation Manual

7.6.7 Receiving vertical alignment data
The vertical curve data can be prepared in the office and uploaded to the
instrument to increase efficiency.
There are two methods to upload data to the instrument.
1. Directly upload the alignment data to the current operating internal memory
from a computer through a data cable (RS-232).
Refer to 10.8 for the operation method
2. Store the alignment data on an SD card, insert the SD card into the
instrument and then copy the data to memory.
Refer to 10.9 for the operation procedures.
The vertical alignment data format is as follows:
Stake number, elevation, length
Note: The length of the initial point and end point must be 0.
For example：
1015.600，30.000，0.000
1325.000，60.000，200.000
1632.000，27.000，315.000
1900.000，33.000，0.000
Convert the designed alignment data into *.VCL file using transmission
softwave. Then copy the data to SD card or the memory.
Note: keep the text file and work file names consistant.
102