Horizon Fitness HTS-580 Series Operation Manual page 87

Operation procedure
Press F1(Line)key from HZ AL
menu to get BEELINE.
After entering the length of the
line press ENT key.
Return to HZ AL menu.
Circular Curve
Press F2 key (ARC) in the "HZ AL Screen", the circular curve can be defined.
Circular curves consists of Arc length and the Radius. The radius value rule:
Looking along the forward direction of the curve, when the curve rotates to right, the
radius value is positive. When the curve rotates to left, the radius value is negative.
The arc length cannot be negative.
Operation
F1
Enter
length
ENT
Display
87