Occupied Point And Backsight Point - Horizon Fitness HTS-580 Series Operation Manual

③Press the F2 （LIST） key
④Pressing [▲]or [▼] key to
select a file press ENT to
return to GATHER DATA
menu 1/2.

8.2.3 Occupied Point and Backsight Point

The occupied point coordinates and the direction angle in the data collect mode
are linked with the occupied point. It is possible to set or change the occupied point
and direction angle from the data collect mode.
Occupied points can be set by two methods:
1) Setting from a known point stored in the internal memory
2) Direct key input
The following three setting methods for backsight point can be
selected:
1）Setting from a known point stored in the internal memory
2）Direct key input of coordinate data
3）Direct key input of setting angle
** The setting of the direction angle can be confirmed by measurement.
F2
ENT
137