7.6.9 Generating a road coordinate file
After finishing the operation of vertical and horizontal alignment you can output
a coordinate file *.PTS to memory.
The operation procedure is as follows:
Operation procedure
In the ROAD DESIGN menu
press [▼] for menu P2.
Press F1 (CAL AND SAVE
COORDINATE TO FILE),
the coordinate file *.PTS will
be created.
7.6.10 Road setting out procedures
For the road setting out program the line of the road must be defined.
Horizontal and vertical alignment can be done according to the procedures in the
previous sections. If vertical data is not required it can be ignored.
104
Operation
[▼]
F1
Display