Horizon Fitness HTS-580 Series Operation Manual page 245

prisms or reflecting objects when the laser is switched on (in laser pointer or distance
measurement mode). Aiming at prisms is only permitted when looking through the
telescope.
Warning：
The use of Laser Class 3R laser equipment can be dangerous.
Precautions：
To counteract hazards, it is essential for every user to respect the safety
precautions and control measures specified in standard IEC60825-1:2001 within the
hazardous distance range.
Below is an interpretation of the main points in the relevant section of the
standard quoted.
Class 3R laser products used on construction sites and outdoors (surveying,
alignment, leveling):
a) Only qualified and trained persons should be assigned to install, adjust and
operate the laser equipment.
b) Areas in which these lasers are used should be posted with an appropriate
laser warning sign.
c) Precautions should be taken to ensure that persons do not look directly, with
or without an optical instrument, into the beam.
d) The laser beam should be terminated at the end of its useful beam path and
should in all cases be terminated if the hazardous beam path extends beyond the
limit (hazard distance *)) of the area in which the presence and activities of
personnel are monitored for reasons of protection from laser radiation.
e) The laser beam path should be located well above or below eye level
245