Setting The Occupied Point - Horizon Fitness HTS-580 Series Operation Manual

9.2.3 Setting Occupied Point
Occupied points can be set by two setting methods:
1) Setting from the coordinate data stored in the internal memory
2) Direct key input of coordinate data
Setting the occupied point from the internal coordinate data file.
Operation procedure
① Press the F1 (0CC. PT
INPUT) key from the Layout
menu 1/2.
②The point can be manually
entered or retrieved by F2
LIST. Press ENT key to
confirm.
③Press the F4 (YES) key to
get to the instrument height.
④Enter INS.HT press ENT.
The display returns to layout
menu 1/2.
*1）Refer to Section 1.10 "How to Enter Alphanumeric characters"
164
Operation
F1
ENT
F4
Enter
INS.HT
ENT
Display