4.ANGLE MEASUREMENT
4.1 Measuring Horizontal Angle Right and Vertical
Angles
Make sure the angle measurement mode is selected.
Operation procedure
①Collimate the first target
(A)
To set horizontal angle of
target A at 0
00 ' 00" press the F1
(0SET) key and then press
the F4 (YES) key
③ Collimate the second
target (B)
The required V/H angle to
target B will be displayed
Note : The horizon angle will be saved when the instrument is powered off and
displayed when powered on.
Operation
Collimate A
F1
F4
Collimate B
Display
33