*1 It is possible to set the measurement mode for N-times measuring mode or
continuous measurement mode when the power is turned on. Refer to Chapter 11
"Basic Settings".
5.5 Stake Out (S.O.)
The difference between the measured distance and the input stake out distance
is displayed.
Measured distance - Stake out distance = Displayed value
In a stake out operation you can select either horizontal distance (HD), relative
elevation (VD), and slope distance (SD.)
Operation procedure
Press the F4(↓) key in the distance
measuring mode to menu P2
Press the F2 (S.O) key
The data previously set is shown
Operation
F4
F2
Display
43