Setting Measuring Mode Display; Setting The Shortcut Keys - Horizon Fitness HTS-580 Series Operation Manual

11.3 Setting the measure mode display
The default display in the measure modes can be set by pressing [F3] POWER ON
DISPLAY on menu 1/2 in the CONFIG screen:
F1: MEASURE
MODE
Shown
F2: HD&VD /SD
F3: COORD.
FORMAT

11.4 Setting the Shortcut Keys

The CST300R has two shortcut keys that can be configured by the user.
Shortcut key
K1
K2
224
Angle
distance
HD&VD
/SD
ENZ/NEZ
Operation
Press the K1 key for 1second
Press F4 key from CONFIG menu
Press the K2 key for 1second.
Press the F4 key from the CONFIG
menu
or Choose the angle or distance
measuring mode.
Choose the distance mode -
Horizontal &Vertical Distance or
Slope Distance
Select the coordinate display
order ENZ or NEZ
1、 REM
2、 MLM
3、 AREA
4、 Z COORD.
5、 POINT TO LINE
6、 ROAD
7、 RESECTION
8、 NONE
Function