Plotting Points - Horizon Fitness HTS-580 Series Operation Manual

10.3.4 Plotting Points

The function is used to display the coordinate points in the coordinate file of the
instrument.
Operation procedure
①Press F3 (MEMORY MGR) key
from the menu (1/3)
②Press F4 key to select a plotting
coordinate file
③ Select the starting points of
plotting. Just like the operation of
data research after define the
plotting starting points, press F4
key
④Now the coordinate points are
displayed on the screen. The
black block is the starting points.
Press F1 or F2 to find the last
point or the next point, press F3
or F4 key to reduce or magnify the
picture, press
key to move the picture.
、 S.O、 K1、 K2
Operation
F3
F4
F4
Display
191