Horizon Fitness HTS-580 Series Operation Manual page 106

Press F2 (ROAD LAYOUT) to
enter into the road setting out
interface.
Press F1 key (SET OCC. PT#)
Input the stake number, offset,
and instrument height to set the
observation station point.
(*1,*2）. Press ENT to confirm,
the instrument will calculate the
coordinate of this point
automatically.
Press F4 (setting) to finish the
setting of the observation station
point and then return to the
interface of road setting out
menu.
*1） The input stake number must be on the defined horizontal alignment; otherwise
the instrument will display "Invalid Stake Number".
*2）Pressing F3 (PT#), you can set the station point from an existing point or by
manually entering coordinate values (9.2.3).
106
F2
F1
Enter
data
ENT
F4