Point To Line Measurement - Horizon Fitness HTS-580 Series Operation Manual

⑾Press the F4 (SET) key *3
Z coordinate of the occupied
point will be set. Backsight
point masuring screen will be
shown.
⑿ Press the F4 (YES) key.
Horizontal angle will be set.
The display
Measurement Programs menu.
*1 Measurement is Fine Single measurement mode.
*2 To measure other points, press the F1 (NEXT) key.
*3 Pressing the F1 or F3 key, the display will be changed alternately.

7.5 Point to Line Measurement

This mode is used to obtain the coordinate data of an unknown occupied point
from a known point and a known line. An observation will need to be taken at the
known point A and along the line N designated for the example as B. After
measuring the 2 points the coordinate and the direction angle of the instrument will
be calculated and recorded.
80
returns to
F4
F4