⑦Show the coordinate of Point
P0
To return to procedure 4,press F1 (NEXT) key
To return to the previous mode, press ESC key
*1)*2)refer to section 8.3.2 "Distance Offset Measurement"
5.6.3 Plane Offset Measurement
Used to facilitate distance or coordinate measuring for a given plane.
Three random prism points (P1, P2, P3) on a plane will be measured at first in the
plane-offset measurement to determine the measured plane. Collimate the
measuring target point (P0) then the instrument will calculate and display coordinate
and distance values of the cross point between collimation axis and the plane.
50