Changing The Distance Measurement Modes; (Repeat Measurement / Single Measurement/Track Measurement) - Horizon Fitness HTS-580 Series Operation Manual

5.4 Changing the Distance Measurement Mode
(Repeat Measurement / Single Measurement/
Track Measurement)
Make sure the angle measurement mode is selected.
Operation procedure
Collimate the center of the
prism
Press the
Measurement begins *1；
Press the F2 (MODE) key to
switch between Repeat
Measurement, Single
Measurement and Tracking
Measurement. [N], [1], [T]
42
key， Continuous
Operation
Collimate
F2
F1
Display