Horizon Fitness HTS-580 Series Operation Manual page 144

⑧Press F4 (REP) key
Measuring starts in the same
measuring mode of the previous
point.
Data is recorded
Continue the measuring in the
same way. Press ESC to finish
GATHER DATA mode.
*1）Refer to Chapter 1.10 "How to Enter Alphanumeric characters".
*2）PCODE can be input by inputting a register number linked with PCODE
library To show the list in the PCODE library, press the F2 (SRCH) key.
*3）The measurement data will be automatically saved to internal memory when
measure mode ONE FINE is selected.
Searching the recorded data
While executing the GATHER DATA mode you can search the recorded data.
Operation procedure
①While executing the COLLECT
DATA mode, press F2 (SRCH)
key.*1
The file name in use will appear
on the top of the right side of the
display.
144
Collimate
F4
Operation
F2
Display