Fault Information Display; Display On Pcpro/Cat; Fault Message - NEC UNIVERGE SV8300 System Maintenance Manual

FAULT INFORMATION DISPLAY

Display on PCPro/CAT

When the MJ/MN alarm has been indicated, you can diagnose the contents of the fault by the Fault Mes-
sage and the Station Line Status Display features which are displayed on the PCPro or the CAT, and restore
the fault.

Fault Message

The fault information is displayed on PCPro/CAT. An example of fault information display is provided
below:
EA0 +
0 +
CAT mode
ST COMMAND=
DE EA0>_
DE EA0>0: XXXXXXXXXXXXXXXX-
S EA0>1: XXXXXXXXXXXXXXXX-
S EA0>2: XXXXXXXXXXXXXXXX-
S EA0>3: XXXXXXXXXXXXXXXX-
S EA0>4: XXXXXXXXXXXXXXXX-
S EA0>5: XXXXXXXXXXXXXXXX-
S EA0>6: XXXXXXXXXXXXXXXX-
S EA0>7: XXXXXXXXXXXXXXXX-
S EA0>8: XXXXXXXXXXXXXXXX-
S EA0>9: XXXXXXXXXXXXXXXX-
EA0>0: XXXXXXXXXXXXXXXX-
For details of (1), (2), see next page.
Chapter 2 TROUBLESHOOTING
Fault Information 0
Fault Information 1
Fault Information 2
Fault Information 3
Fault Information 4
Fault Information 5
Fault Information 6
Fault Information 7
Fault Information 8
Fault Information 9
(1) (2)
2-12
FAULT INFORMATION DISPLAY
NWA-033627-001 Rev.4.0
95ch2001.fm