Inmail Station Mailbox Options - NEC SL1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Use Program 47-02 : InMail Station Mailbox Options to set up a station/extension mailbox. Station
Program
mailboxes are automatically assigned as Subscriber Mailboxes. Normally, InMail Station Mailbox num-
bers 1 ~ 64 should correspond to extensions 200~263.
47
Station Mailboxes are one of three mailbox categories: Station, Routing, or Master. You can also set up
Master Mailboxes as Subscriber Mailboxes.
Input Data
Item No.
01
02
03
04
05
2-384

47-02 : InMail Station Mailbox Options

Station Mailbox Number
Item
Mailbox Type
Use this option to enable or disable the mailbox. An
extension mailbox is not accessible when it is dis-
abled (even though its stored messages and con-
figuration are retained in memory.) If disabled, a
user pressing Message initiates a remote logon and
is asked to enter their mailbox number. A voice
prompt then announces: "That mailbox does not
exist."
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 200.
Mailbox Number
Use this option to select the extension number asso-
ciated with the mailbox you are programming. Nor-
mally, mailbox 1 should use Mailbox Number 200,
mailbox 2 should use Mailbox Number 201, 101 etc.
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 200.
Number of Messages
Use this option to set the maximum number of mes-
sages that can be left in the Subscriber Mailbox. If a
caller tries to leave a message after this limit is
reached, they hear : "That mailbox is full." InMail
then hangs up.
Message Playback Order
Use this option to set the Subscriber Mailbox mes-
sage playback order. When a subscriber listens to
their messages, InMail can play the oldest mes-
sages first (first-in/first-out, or FIFO), or the newest
messages first (last-in/first-out, or LIFO).
Auto Erase/Save of Messages
Use this option to determine what happens when a
Subscriber Mailbox user completely listens to a new
message and then exits the mailbox without either
saving (SA) or erasing (E) the message. Depending
on the setting of this option, InMail either automati-
cally saves or erases the message. If the mailbox
user hangs up before listening to the entire new
message, InMail retains the message as a new
message.
Program 47 : InMail
001 ~ 128 (SL1000)
001 ~ 120 (SL1100)
Input Data
0 = None
1 = Personal
2 = Group
Up to four digits (SL1000)
Up to eight digits (SL1100)
0 ~ 99 messages
To conserve storage space,
enter 0 for all unused mail-
boxes.
0 (FIFO = first-in/ first-out, or
oldest messages first).
1 (LIFO = last-in/ first-out, or
newest messages first)
0 = Erase
After the subscriber listens to
the entire new message and
hangs up, InMail erases the
message.
1 = Save
After the subscriber listens to
the entire new message and
hangs up, InMail saves the
message.
Program 47 : InMail
ISSUE 1.0
Default
Mailbox 1 ~ 64 : 1
Mailbox 65 ~ : 0
Mailbox 1 = 200
Mailbox 2 ~ 64 = 201
~263
Mailbox 65 ~ = No set-
ting
Mailbox 1 = 99
Mailbox 2 ~ = 20
0
1