To Perform Measurement - Keysight Technologies B1505A User Manual

Figure 1-8
Getting Started

To Perform Measurement

To Perform Measurement
1. Click the Single button (upper right on the main screen) to start measurement.
This opens the Data Display window and starts a single sweep measurement.
After the measurement, the measurement data is displayed on the Data Display
window. For the measurement after performing
page 1-14, you will have the test result as shown in
leakage current measurement result because all measurement terminal is opened
for performing the procedures described in this chapter.
2. If the automatic data record function has been set to ON (Auto Record ON), Test
Result Editor appears on the lower area of the screen when the measurement is
completed. See "To Use Test Result Editor" on page
Display Example of Data Display Window
1-16
"To Use Classic Test Mode" on
Figure
1-17.
Keysight B1505A User's Guide, Edition 12
1-8. This is the