Keysight Technologies B1505A User Manual page 107

WARNING
Rear Panel
± 200 V
1
1
2
MF CMU Input
±25 V
Interlock Hcur
2
Lcur
3
The connector cap must be connected to the unused input connectors for safety.
Le capuchon du connecteur doit être raccordé aux connecteurs d'entrée
inutilisés.
1. Input
• AUX1 and AUX2 input connectors
BNC connectors. For connecting MFCMU or external instruments.
• HPSMU1 and HPSMU2 input connectors
Force and Sense triaxial connectors. For connecting 16493K Kelvin triaxial
cable or 16494A triaxial cable from the HP/MPSMU.
• HVSMU1 input connector
HV(jack) connector. For connecting 16493T HVSMU cable from the
HVSMU or the HVMCU High.
• GNDU1 input connector
GNDU triaxial connector. For connecting 16493L GNDU cable from the
GNDU or the HVMCU Low.
Keysight B1505A User's Guide, Edition 12
Input
HPSMU1 HPSMU 2
±200 V Max ±200 V Max
AUX HVSMU1
Max ± 3 kV Max
Force Force
Sense Sense
To avoid electrical shock and instrument damage,
do not remove the short cap and cables during operation.
Module Selector Input
Max HPSMU 3
±200 V Max
HVSMU2
± 3 kV Max
Hpot
Force
Lpot
Sense
To avoid electrical shock and instrument damage,
do not remove the short cap and cables during operation.
4
Accessories
GNDU 1 HCSMU 1 HCSMU2
± 40 V Max ±40 V Max
Force Force
Sense Sense
LINE
100–240 V
Digital I/O
50/60 Hz
GNDU 2 HCSMU 3
± 40 V Max 35 VA Max
Force
Sense
N10149
5
7
6
3-11