Keysight Technologies B1505A User Manual page 48

NOTE
NOTE
Introduction
This chapter describes the basic functions and features of Keysight B1505A Power
Device Analyzer/Curve Tracer, and consists of the following sections:
• "Overview"
• "Front View"
• "Rear View"
• "Accessories and Options"
• "Measurement Resources"
Application Library
Keysight B1505A has installed Keysight EasyEXPERT software as the user
interface. The EasyEXPERT contains an application library that is a set of test
definitions. The application test can be performed by selecting a test definition and
setting the test condition for the actual DUT (device under test).
All test definitions are just sample. If the samples damage your devices, Keysight
Technologies is NOT LIABLE for the damage.
Furnished Sample Programs (Utility)
The following sample programs are stored in the following folder.
• <program folder>\Agilent\B1500\EasyEXPERT\Utilities\
Prober control programs
sleep.exe program
• <program folder>\Agilent\B1500\EasyEXPERT\415xC\Conversion\
4155/4156 setup file converter
• <program folder>\Agilent\B1500\EasyEXPERT\IC-CAP Support\MDM\
MDM file converter for IC-CAP users
Where, <program folder> is as follows. Then, <system drive> is the drive the
EasyEXPERT has been installed.
For Windows 7 64 bit version, <system drive>:\Program Files (x86)
For Windows 7 32 bit version, Vista, or XP, <system drive>:\Program Files
For more details of programs, see Keysight EasyEXPERT User's Guide.
2-2 Keysight B1505A User's Guide, Edition 12