WARNING
Measurement Examples
I-V and Capacitance Measurements Using N1272A
I-V and Capacitance Measurements Using
N1272A
This section introduces the Power MOSET Ciss (input capacitance) and IDSS
(drain-source leak current) measurement examples with controlling the N1272A
Device Capacitance Selector and consists of the following sub-sections.
•
"Preparing Measurement"
•
"System Configuration and Open/Short Calibration"
•
"Preparing Capacitance Measurement Setups"
•
"Performing Capacitance Measurement"
•
"Preparing IV Measurement Setups"
•
"Performing IV Measurement"
•
"Available Application Test List"
Preparing Measurement
Set the instrument output off before connecting or disconnecting a connection
wire.
Press the B1505A front panel
the B1505A front panel High Voltage indicator is not lit.
Désactivez la sortie de l'appareil avant de brancher ou de débrancher un câble
de connexion.
Appuyez sur la touche
sortie. Et confirmez que l'indicateur de tension High du panneau avant du
B1505A n'est pas allumé.
5-24
key to set the output off. And confirm that
Stop
du panneau avant du B1505A pour désactiver la
Stop
Keysight B1505A User's Guide, Edition 12