Figure 1-1
NOTE
If Only One Workspace Exists
For the screen as shown in
•
If you do not want to create a workspace, select the Yes radio button and click
OK. Skip to
"To Use Tracer Test Mode" on page
Mode" on page
1-12, or
•
If you want to create a workspace, select the No, I want to start a new session.
radio button and click Next. The B1500A displays the screen as shown in
1-2. Skip to
"To Create Workspace" on page
If you want to manage workspaces, select the No, I want to manage Workspaces.
•
radio button and click Next. The B1500A displays the screen as shown in
1-3. Skip to
"To Select Workspace" on page
If Only One Workspace Exists
Work on the same setups and data next time
If this check box is checked, the workspace selection screen will be skipped at the
next startup and EasyEXPERT will be launched with the workspace used at the last
operation. To perform this setup again, click the File > Close Workspace menu on
the EasyEXPERT main screen.
Keysight B1505A User's Guide, Edition 12
Figure
1-1, perform the following steps.
"To Use Classic Test Mode" on page
1-8.
1-9.
Getting Started
To Launch EasyEXPERT
1-10,
"To Use Application Test
1-14.
Figure
Figure
1-7