Figure 9: Twisted Pair Ports On The At-Ie300-12Gp Switch; Table 7: Twisted Pair Port Leds On The At-Ie300-12Gt Switch - Allied Telesis AT-IE300-12GP Installation Manual

Table 7. Twisted Pair Port LEDs on the AT-IE300-12GT Switch
LED State
Solid Green
Duplex
Solid Amber
Mode
Off
Solid Green
Flashing
Green
L/A
Solid Amber
Flashing
Amber
Off
The twisted pair ports on the AT-IE300-12GP Switch have two LEDs each.
The LEDs are identified in Figure 9.
Power over
Ethernet
Speed and
activity
Figure 9. Twisted Pair Ports on the AT-IE300-12GP Switch
The states of the LEDs on the twisted pair ports on the AT-IE300-12GP
Switch are defined in Table 8 on page 44.
Description
The port is operating in full duplex mode.
The port is operating in half duplex mode.
The port has not established a link with a
network device.
The port has established a 1000 Mbps link
to a network device.
The port is transmitting or receiving data at
1000 Mbps.
The port has established a 10 or 100 Mbps
link to a network device.
The port is transmitting or receiving data at
10 or 100.
The port has not established a link with a
network device.
IE300 Series Installation Guide
43