Basic Operator Panel 20 (Bop20) - Siemens SINAMICS S120 Commissioning Manual

Commissioning

2.3 Basic Operator Panel 20 (BOP20)

12. Close the "Edit Ethernet node" window.
Note
ST (Structured Text) conventions must be satisfied for the name assignment of IO
devices in PROFINET (SINAMICS components). The names must be unique within
PROFINET.
The characters "-" and "." are not permitted in the name of an IO device.
13. Activate the option button in front of the detected drive unit and click the "Accept" button.
14. Click on the button "Connect to target system" and then call the menu "Target system >
Note
The IP address and device name for the Control Unit are stored on the memory card
(non-volatile).
2.3 Basic Operator Panel 20 (BOP20)
Short description
The Basic Operator Panel 20 (BOP20) is a basic operator panel with six keys and a two-line
display unit with background lighting. The BOP20 can be plugged onto the SINAMICS
Control Unit and operated.
The BOP20 supports the following functions:
● Input and changing parameters
● Display of operating modes, parameters and alarms
● Display and acknowledgement of faults
● Powering-up/powering-down while commissioning
● Simulation of a motorized potentiometer
74
The SINAMICS drive with CBE20 is transferred as a drive object into the project tree. You
can now continue to configure the drive object.
Load > To target device", to load the project to the Control Unit memory card.
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
Commissioning Manual