Basic Operator Panel 20 (Bop20); Operation With Bop20 (Basic Operator Panel 20); General Information About The Bop20 - Siemens SINAMICS S120 Commissioning Manual

2.3

Basic Operator Panel 20 (BOP20)

Short description
The Basic Operator Panel 20 (BOP20) is a basic operator panel with six keys and a two-line
display unit with background lighting. The BOP20 can be plugged onto the SINAMICS
Control Unit and operated.
The BOP20 supports the following functions:
● Input and changing parameters
● Display of operating modes, parameters and alarms
● Display and acknowledgement of faults
● Powering-up/powering-down while commissioning
● Simulation of a motorized potentiometer
2.3.1

Operation with BOP20 (Basic Operator Panel 20)

2.3.1.1

General information about the BOP20

The BOP20 can be used to switch on and switch off drives during the commissioning phase
as well as display and modify parameters. Faults can be diagnosed as well as
acknowledged.
The BOP20 is snapped onto the Control Unit. To do this, the blanking cover must be
removed (for additional notes on installation, see the Manual).
Overview of displays and keys
Figure 2-10
Commissioning Manual
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
Overview of displays and keys
Commissioning
2.3 Basic Operator Panel 20 (BOP20)
65