Siemens SINAMICS S120 Commissioning Manual page 96

Commissioning
2.4 Creating a project in STARTER
What to do?
2.2 Selecting the
access point
2.3 Selecting the
PG/PC interface
94
How to do it?
The target device can be accessed via STARTER or via STEP 7.
1. For step 2, click on "Access point".
2. Select the access point for the accessible nodes.
In this window, the interface can be selected, set and tested.
1. For step 2, click on "PG/PC".
2. Select the "Access point of the application" and therefore also the interface parameter
assignment.
If the desired interface does not yet exist in the selection list, you can create additional
interfaces using the "Select" button.
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
Commissioning Manual