Terminal Module; Terminal Module Tm15 - Siemens SINAMICS S120 Commissioning Manual

3.1.4

Terminal Module

3.1.4.1

Terminal Module TM15

Table 3- 42 Meanings of the LEDs on the Terminal Module TM15
LED Color
READY -
Green
Orange
Red
Green/
red
Green/
orange
or
Red/
orange
Commissioning Manual
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
Status
Off Electronics power supply is missing or outside permissible
tolerance range.
Continuous The component is ready for operation and cyclic DRIVE-
light CLiQ communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
light
Continuous At least one fault is present in this component.
light
Note:
The LED is activated regardless of whether the
corresponding messages have been reconfigured.
Flashing Firmware is being downloaded.
light 0.5 Hz
Flashing Firmware download is complete. Wait for POWER ON
light 2 Hz
Flashing Component recognition via LED is activated (p0154).
light
Note:
Both options depend on the LED status when component
recognition is activated via p0154 = 1.
Description, cause
Diagnostics
3.1 Diagnostics via LEDs
Remedy
–
–
–
Remedy and
acknowledge fault
–
Carry out a POWER
ON
–
213