Notes On The Number Of Controllable Drives - Siemens SINAMICS S120 Commissioning Manual

Table 1- 5
Component
Active Line Module booksize
Active Line Module chassis
Power Module chassis
Motor Module Chassis
1.5.3

Notes on the number of controllable drives

The number and type of controlled axes and the extra activated functions of the project can
be scaled by configuring the firmware. Especially for demanding configurations, drives with
high dynamics or a large number of axes with additional utilization of special functions for
example, a check using the SIZER configuration tool is recommended. The SIZER
calculates the feasibility of the project.
The maximum possible functionality depends on the performance of the Control Unit used
and the components configured.
Commissioning Manual
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
VSM connection
1.5 Rules for wiring with DRIVE-CLiQ
VSM connection
X202
X402
X402
X402 (active with PEM encoderless and "Flying restart"
function)
Preparation for commissioning
31