Siemens SINAMICS S120 Commissioning Manual page 66

Commissioning
2.2 STARTER commissioning tool
3. Click on button "Select".
Figure 2-5 Setting the interface
4. In the selection list on the left-hand side, select the module that you want to use as the
5. Click the "Install" button.
6. Click on "Close".
64
interface.
The selected module is then listed in the "Installed" list.
You can then check the IP address of the integrated Ethernet interface as follows:
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
Commissioning Manual