Programmable DC Electronic Load 63600 Series Operation & Programming Manual
5.3.2.15 RUN Subsystem
:RUN
RUN
Type:
Description:
Setting Syntax:
5.3.2.16 SHOW Subsystem
:SHOW
SHOW[:DISPlay]
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD>, L | R
Example:
5-80
All Channels
Set all electronic loads to "ON".
RUN
:DISPlay
SP
Channel-Specific (Dual Channel Module Only)
Set the display mode for the electronic load.
SHOW:DISPlay<space><CRD>
SHOW:DISP L
SHOW:DISP R
L
R
Display the voltage and current values of
channel L.
Display the voltage and current values of
channel R.