5.6.2
Specific Commands for 62000H Series
5.6.2.1 ABORT Subsystem
ABORt
Description:
Syntax:
5.6.2.2 CONFIGURE Subsystem
1.
CONFigure:BEEPer
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter: ON | OFF
Query Example:
Return Example:
2.
CONFigure:REMote
Description:
Syntax:
Parameter:
Example:
3.
CONFigure:OUTPut
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Query Example:
Return Example:
4.
CONFigure:FOLDback
Description:
Syntax:
data from the output buffer and no data is present,
or when the data is lost.
1
Always 0.
0
1
It sets all output state to "OFF".
ABORt
It sets the beeper to ON or OFF.
CONFigure:BEEPer ON
CONFigure:BEEPer OFF
ON|OFF
CONF: BEEPer ON
CONF: BEEPer OFF
CONFigure:BEEPer?
CONF:BEEPer?
ON or OFF
It sets the remote control status (valid for RS232C only).
CONFigure:REMote ON
CONFigure:REMote OFF
ON|OFF
CONF:REM OFF
It sets the output voltage/current.
CONFigure:OUTPut ON
CONFigure: OUTPut OFF
ON|OFF
CONFigure: OUTPut
CONFigure: OUTPut OFF
CONFigure: OUTPut?
CONF: OUTPut?
ON or OFF
It sets the type of FOLDBACK PROTECT.
CONFigure:FOLDback DISABLE
CONFigure:FOLDback CVTOCC
CONFigure:FOLDback CCTOCV
Remote Operation
It returns the beeper control status.
It disables remote control.
The power supply starts output.
The power supply stops output.
5-11