Table of Contents
Advertisement
*CLS
*ESE
*ESE?
*ESR?
*IDN?
*OPC
*OPC?
*RCL
*RDT?
*RST
*SAV
*SRE
*SRE?
*STB?
*CLS
Clear Status Command
Type:
Description:
Setting Syntax:
Setting Parameters: nil
*ESE
Standard Event Status Enable Command/Query
Type:
Description:
;
Device Status
The *CLS command executes the following actions:
1. Clear these registers
<1> Channel Status Event registers for all channels
<2> Channel Summary Event register
<3> Questionable Status Event register
<4> Standard Event Status Event register
<5> Operation Status Event register
2. Clear the Error Queue
3. If "Clear Status Command" immediately follows a program
message terminator (<nl>), the "Output Queue" and the MAV bit
are also cleared.
*CLS
Device Status
This command sets the condition of the Standard Event Status
Enable register to determine which event (see *ESR?) is allowed to
set the ESB (Event Summary Bit) for the Status Byte register. A "1"
in the bit position enables the corresponding event. All of the events
<NR1>
SP
<NR1>
SP
<NR1>
SP
<NR1>
SP
Remote Operation
5-21
Advertisement
Table of Contents
