Mode Subsystem - Chroma 63610-80-20 Operation & Programming Manual

5.3.2.11 MODE Subsystem

:MODE
MODE
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD>, CCL, CCM, CCH, CRL, CRM, CRH, CVL, CVM, CVH, CPL,
Example:
Query Syntax:
Return Parameters:<CRD>, CCL, CCM, CCH, CRL, CRM, CRH, CVL, CVM, CVH, CPL,
Query Example:
SP
Channel-Specific
This command sets the operational mode for the electronic load.
MODE<space><NRf>
CPM, CPH, CZL, CZM, CZH, CCDL, CCDM, CCDH, CCFSL,
CCFSM, CCFSH, TIML, TIMM, TIMH, SWDL, SWDM, SWDH,
OCPL, OCPM, OCPH, PROG, MPPTL, MPPTM, MPPTH, UDWL,
UDWM, UDWH
MODE CCL
MODE CCH
MODE CCDL
MODE CCDH
MODE CRL
MODE CRH
MODE?
CPM, CPH, CZL, CZM, CZH, CCDL, CCDM, CCDH, CCFSL,
CCFSM, CCFSH, TIML, TIMM, TIMH, SWDL, SWDM, SWDH,
OCPL, OCPM, OCPH, PROG, MPPTL, MPPTM, MPPTH, UDWL,
UDWM, UDWH
MODE?
CCL CCM
CRL CRM
CVL CVM
CPL CPM
CZL CZM
CCDL CCDM
CCFSL CCFSM
TIML TIMM
SWDL SWDM
OCPL OCPM
PROG
MPPTL MPPTM
UDWL UDWM
?
Set CC mode of low range.
Set CC mode of high range.
Set CC dynamic mode of low range.
Set CC dynamic mode of high range.
Set CR mode of low range.
Set CR mode of high range.
Remote Operation
CCH
CRH
CVH
CPH
CZH
CCDH
CCFSH
TIMH
SWDH
OCPH
MPPTH
UDWH
<CRD>
5-69